QuickJack 7000TLX Extended Portable Car Lift

7000TLX Extended-Length Portable Car Lift

The 7,000-lb. capacity 700TLX is the safest, highest-capacity and longest-reaching portable car lift ever made. Vehicle types with lift points that stretch toward the edges of the wheelbase can finally be serviced by a fully collapsible, open-center car lift. Until the 7000TLX , only two-post and four-post lifts could service such vehicles. Even mid-rise lifts, while popular in many auto detailing shops and repair bays, often struggle with unique lift point spreads. Compared to other QuickJack models, the 66″ lift point reach on the 7000TLX allows operator access to more trucks and SUVs than ever before.

Despite the longer, beefier construction, the 7000TLX car lift still reaches its max rise in approximately 30 seconds. A QuickJack truck/SUV adapter kit, sold separately, adds extra rise and convenience.

Like our lower-capacity portable car lifts , built-in durable urethane wheels mean the 7000TLX frames can be rolled around, indoors or outdoors, at your convenience. This is our heaviest model, but no bolts are required, and no special wiring is ever necessary.

The 76″ frames are longer than our TL models , but they’re still convenient to roll and stow around the garage. An SUV or truck bed can make for perfect transportation to the track or other locations. As long as the ground is level, the assembly can be taken outdoors for use on dirt, gravel, grass, asphalt or concrete. Initial setup is fast and easy, and then it’s seconds to get from stow-to-go.

With a collapsed profile just over 3.5″, the 7000TLX needs no extra support crossbeams. It’s the perfect car lift for shops with little space to spare and big vehicles to service.

Extended-length car lift design

The 7000TLX portable car lift has been redesigned to accommodate heavy, high-clearance vehicles with long wheelbases. We’ve increased the overall frame length and lift point spread by 6”. This means the minimum lift point spread is now 6” longer, so smaller vehicles may not fit with the 7000TLX.

TL minimum lift point spread: 37″
TLX minimum lift point spread: 43″

TL maximum lift point spread: 60″
TLX maximum lift point spread: 66″

TL overall frame length: 70″
TLX overall frame length: 76″

What’s the difference between the NEW TL Models vs. SLX Models?

The biggest difference between the 7000TLX and BL-7000EXT is the lifting height, which has increased 3 inches. This provides ample room to perform all the common vehicle maintenance tasks and allows you the capability to perform even the most complicated repairs.

Overall dimensions have remained the same, so you’ll continue to benefit from what made QuickJack so popular in the automotive community and that is it’s super-low 3″ lowered height. The minimum lifting point spread did change from 31.5″ to 37″, but this will not make a difference to the vast majority of 7000TLX users.

SpecificationsQuickJack 7000TLX Extended Portable Car Lift